Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

Super Togeru Knife Sharpening Guide

No reviews yet - add a review
Naniwa Sharpening Equipment
Found in Departments: Naniwa Sharpening Equipment
  Sharpening Guides and Aids
Super Togeru Knife Sharpening GuideSuper Togeru Knife Sharpening Guidecancelleft arrowright arrow
click to enlarge
/prodimg/ms/thb/MS-STOGERU_thb.gif
/prodimg/ms/thb/MS-STOGERU_A_thb.gif

Quantity in Cart: none
Code: MS-STOGERU
Price: $16.95
Shipping Weight: 0.09 lb.
In Stock
Quantity:
MS-STOGERU
Here's a clever little aide that can help perfect your sharpening. High quality knives should always be sharpened on stones, but many chefs feel insecure about their stone sharpening skills. Whether you're using diamond stones, oil stones or water stones, if the knife is sharpened correctly, you will get a sharp demarcation between the bevel of the sharpened edge and the side of the blade. This sharp demarcation prevents slices from riding up the side of the knife and helps them fall off in neat piles on your cutting board. Holding a consistent bevel is the most important and difficult part of knife sharpening, and here's where the Super Togeru comes in.

The Super Togeru is a clip that snaps on to the back of the knife so you can work with a consistent angle. It's deceptively simple, a traditional design that's been updated with new materials for better performance. The Super Togeru works great success on knives from 4 1/2" long up to around 8" long, but it can be used on longer knives if you move the guide around or use multiple guides. Older versions of this design were all metal and would wear the stone prematurely and also scratch the surface of the knife. The clip on this model is made of plastic, so that it doesn't scratch the knife, and its wear surface, the part that bears against the sharpening stone, is very smooth hard ceramic that won't wear easily (except maybe on diamond stones), or wear a hollow in your sharpening stone.

The Super Togeru exceeded our expectations when we tested it. The clip holds onto the blade very well and we could detect no wear on either the stone or the gliding surface. The best part is that we were able to get really consistent edges with far less concentration that we would get free hand. It makes sharpening go much faster and with less effort. It actually made it worthwhile to stone-sharpen lesser knives that we would not normally want to spend the time on. We were really impressed by its value.

Note: In use you should apply pressure at the knife edge and only have enough pressure at the knife back to keep consistent contact of the guide with the stone. 3 7/8" long. Fits knives to about a 3/16" thick back and at least 3/4" or 7/8" long (depending on how it sits in the guide). Stones and knife shown in picture are not included. Made in Japan.

Please contribute your own review:

 
Anonymous reviews will not be published