Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

Saw Files by Corradi

read 2 reviews
Found in Departments: Corradi Files
  Rasps and Files
Saw Files by CorradiSaw Files by Corradicancelleft arrowright arrow
click to enlarge

Quantity in Cart: none
Code: CO-SAWFILE.XX
Quantity:
 Triangular Needle File (200mm 2nd cut 9/64" wide) (for 15tpi and finer teeth) ($11.95) In Stock
 4" Extra Slim ($5.95) In Stock
 4" Slim ($5.95) In Stock
 4 1/2" Extra Slim ($5.95) In Stock
 4 1/2" Slim ($5.95) In Stock
 5" Extra Slim ($5.95) In Stock
 5" Slim ($5.95) In Stock
 6" Extra Slim ($6.95) In Stock
 6" Slim ($6.95) In Stock
 7" Extra Slim ($7.95) In Stock
 7" Slim ($7.95) In Stock
 8" Extra Slim ($9.95) In Stock
 8" Slim ($9.95) In Stock
Quantity:
CO-SAWFILE.XX
  • Main
  • Specs

With a saw file, practice, and a little instruction you can keep your saws cutting swift and straight, and turn any flea market find into a gem. Our range of Corradi saw files will work for Western Saws from 6 TPI to 15 TPI. The Corradi needle file will be perfect for 15 TPI and finer saws. We particularly like the Corradi files for their geometry - they have small arrises (the flat spot at the tip of each edge, think of a triangle with the top knocked off), which equates to more control over the size of your gullets. With a large arris it is easier to gouge out the gullets and shrink your teeth. Corradi Saw Files allow for much more careful sharpening, especially with higher TPI saws.

We have found that for larger backsaws and our hardware store saw a 3-square machinists file produces the best result. 3-square files have the smallest arrises, and being second cut, cut finer and better on thin plate saws. The narrow arrises mean deeper gullets and faster sawing.

You should always fit a file to a handle for proper use; saw files have different tangs than regular files and therefore do not correspond with the usual handle size recommendations. Nearly all of our saw files use a #3 Skroo-zon handle, the 7" slim uses a #4 (see below for the link). The Needle File Handle does not match a Skroo-zon handle but rather a plastic handle made by Corradi called "Handle for Needle Files and Other Small Shafted Items" linked below.

See our Specs tab for sizing info and TPI recommendations.

Made in Italy.

Slim Taper
 File Size  Length mm  Cross Section mm 
 4" 1006.0
 4 1/2" 1156.0
 5" 1257.0
 6" 1508.5
 7" 17510.0
 8" 20012.0


X-Slim Taper
 File Size  Length mm  Cross Section mm 
 4" 1005.0
 4 1/2" 1155.0
 5" 1256.0
 6" 1507.0
 7" 1758.5
 8" 20010.0


Choosing the right file size:
 TPI  File Size 
<=4 1/28" Slim or Extra-Slim
4 1/2-67" Slim
6 1/2 - 8 1/27" Extra-Slim
8-96" Slim
9-106" Extra-Slim
10-115" Extra-Slim
10-124" Slim or Extra-Slim
11-144" Extra-Slim
>=15 Needle File


Customer Reviews:for an average rating of:
Corradi Saw Files
By: Sam H (Aug, 2022)
I've picked up a few Corradi saw files and rasps. They are first rate quality and worth any premium over the saw files at big box stores. Its pretty disheartening when a brand new saw file skates across the tooth the a saw without cutting. You won't experience that with these. Smooth even cutting from tip to tang, and good life to boot!
I own this product.
Corradi Saw Files
By: Mike Z. (Sep, 2021)
I wanted to add a review since there are none right now. After much hand holding and help from the good people at TFWW, I purchased a handful of various files for sharpening western saws. The Corradi files are the best I've seen the last decade, hands down. Others whose brands won't be mentioned were literally unusable. I can sharpen my back and panel saws again, and recommend these files to anybody who needs to sharpen their own saws. I hope the quality remains as good files are as scarce as hens teeth on the market today!
I own this product.

Please contribute your own review:

 
Anonymous reviews will not be published