Invest in your craft. Invest in yourself.
Planes & Shaves
Measuring & Layout
Hammers and Mallets
Rasps and Files
Scrapers & Burnishers
Vises, Holdfasts, Work Holding
Film for "Scary Sharpening"
Sharpening Guides & Aids
Grinders, Wheels, Files, & Etc.
Abrasives, Sandpaper & Steel Wool
Brushes, Tools, & Accessories
Restoration, Repair, & Maint
Real Milk Paint
W. L. Lockwood Dyes
Shellac and French Polishing
Dyes, Stains, & Pigments
Oils, Varnishes, Lacquers, & Fillers
Finishing for Woodturners
Drill Bits & Equip.
Whiteside Router Bits
Glue and Adhesives
Festool Power Tools
Dust Extractors & Acc.
Routers & Planers
Sanders & Abrasives
Systainers & Transport
Tables & Rails
Carving & Sculpture
Carving Tool Chart
Block Cutter Chart
Occidental Leather Tool Belts
Blaklader Work Wear
Tool Rolls, Totes & Backpacks
Books & Media
Sales & Specials
Order on-line or visit our Brooklyn Showroom
The Build-It Blog
The Work Magazine Reprint Project
The Comely Advertiser - Dec. 2014
Modern Edge Tools - 2012
December 2011 Mini-Catalog and Other Downloads
Using Lockwood Dyes
How To Sharpen
Setting Hoops on Japanese Chisels
The Design of Bow Saws
The Art of Brushmaking
All About Auriou Rasps and Rifflers
Chris Pye's guide to his 2 1/2 Gouges
A Guide to Chisels
A Guide to Mortise and Marking Gauges
A Short Guide to Carving Tool Terminology
Gramercy Tools Bowsaw Kit Plans
Gramercy Tools 14" Sash Saw Kit Plans
Gramercy Tools 9" Dovetail Saw Kit Plans
Gramercy Tools 12" Carcase Saw Kit Plans
Isometric Drafting Paper
The Essential Guide to Saw Tooth Design
Brusso Brass Feet for Small Projects
No reviews yet -
add a review
Found in Departments:
click to enlarge
Quantity in Cart:
Free returns for six months. Learn more.
MC-444 - 1/2" diam x 15/16" installed height
- drill 3/8" x 7/32" deep.
JB-426 - 3/4" diam. x 9/16" installed height
- drill 1/2" hole x 5/16" deep.
JB-423 - 1/2" diam x 3/8" installed height
- drill 5/16" hole x 1/4" deep.
JB-755 - 1" diam. x 1/8" installed height
- drill 5/8" hole x 9/32" deep.
HD-702 - 7/8" square x 1/4" when surface mounted. Screws included.
Free returns for six months. Learn more.
Small projects such as jewelry boxes can get an elegant, decorative boost from these smart little feet. The feet are really easy to install. Each foot has a stub that gets glued into the project. Drill a hole the same size as the stub, put some glue on the stub and glue in the foot. Once the glue sets, the feet become permanent and stay put (so it's a good idea to glue in the feet at the last minute, when you've finished all your other last minute modifications to your work.) The glue doesn't actually stick to the metal - it gets caught in the grooves around the foot and will keep it firmly in place. The feet are listed in the order shown in the photograph, from left to right. The dimensions listed are the diameter of the feet followed by the visible height of the foot after you install them. The other type of square foot, shown, ready to be installed,
in the picture on the right, is screwed on the corners. It's a very low profile that gives a classy look when you don't want to design of the foot to intrude on the overall look of the piece. You can either surface-mount the feet as shown, or recess it into the corner of your box, for an even lower-profile look. The inner corner of the foot is radiused, so that if you decide to recess the foot you can easily use a router to cut the recess. A brass router template is available for easy installation.
Click here for installation instructions
All feet are sold in sets of four. Solid brass.
Purchase 4 or more Brusso hardware packages and receive a 10% discount as our way of saying thank you. The discount will automatically show up as an entry in your basket.
All Brusso hardware is now also available in beautiful, solid stainless steel (not shown).
Brusso Hardware is Made in the USA.
Please contribute your own review:
I own this item
I manufacture this item
Anonymous reviews will not be published
Hours: M-F 8:00-5:00, Sa 11:00-5:00
Our Guarantee & Return Policy
Shipping & Privacy Info
Phone: 800-426-4613 or 718-499-5877 Visit Us in Brooklyn:
Directions to Our Showroom
© 1999-2016 toolsforworkingwood.com
Coded entirely in NYC