| Planer head standard, HL850 (#484520) ($164.00) In Stock|
| Planer head fine, HL850 (#484521) ($192.00) In Stock|
| Planer head coarse, HL850 (#484522) ($192.00) In Stock|
| Planer head undulating, HL850 (#485331) ($192.00) In Stock|
| Spiral blade standard, HL850 (#484515) ($42.00) Sold Out|
(click here to Email Me When Available)
| Spiral blade fine, HL850 (#484518) ($42.00) In Stock|
| Spiral blade coarse, HL850 (#484519) ($42.00) In Stock|
| Spiral blade undulating, HL850 (#485332) ($42.00) In Stock|
| Clamps 120mm 2x, FS (#489570) ($44.00) In Stock|
| Angle stop, HL850 (#485018) ($120.00) In Stock|
| Parallel stop, HL850 (#484513) ($29.00) In Stock|
| Rebate depth stop , HL850 (#484512) ($20.00) In Stock|
| Chip collection bag, HL850 (#484509) ($68.00) In Stock|
| || Suction adapter, HL850 (#484507) ($19.00) In Stock|
The power portable planer is a weird stepchild in the power tool world. For most people it's totally unnecessary. It's not a replacement for a stationary planer and consequently it gets dismissed a lot. However, for those working on-site it can be a godsend. A portable planer is the best way to trim an edge of a door or remove rough marks from wood. Using it is quick; it's easy; and unlike doing a lot of sanding, you don't loose the crispness of the edge.
But with a Festool you expect and get even more. The 850 can plane a rebate and even plane an existing rebate (deepen the rebate, clean it up, etc.). Because the planer head is just mounted on one side, it sits flush with the opposite side of the planer housing and you can cut flush to an adjacent surface. You can also plane up to the edge in deep rebates, because the HL 850 has a side guard that swings up as the rebate depth increases. You can reach the lever to move the guard easily without changing your hand position.
There are a bunch of interesting accessories available. A Bench unit (485017) coupled with an angle stop (485018) turns the planer upside down in to gives you a mini-stationary unit for controlled milling. The various stops - angle (485018), and rebate stop (484512) - give you total control to make repeatable rebates and plane on an angle. The planer has three additional planer heads (available separately) for decorative surface effects: rustic/fine, rustic/coarse, and rustic/undulating. This is an easy way to lend a decorative texture to your work.
The blade is easily changed too - just loosen three screws, replace the blade and tighten back up. The blade automatically gets adjusted. The planer also has Festool's characteristic smoothness. The unique spiral blade means you'll always get a smooth planning pattern free of chatter marks. MMC electronics keep the cutting speed constant and a convenient rotary handle makes adjusting the cutting depth simple. Finally, Festool's dust extraction - second to none - means your piece and your work environment will be clean and dust-free.
|Power consumption:||850 Watts / 7 amps 120 v AC|
|Drive shaft speed:||10000 rpm |
|Cutting depth: ||0 - 9/64" (0 - 3.5 mm) |
|Rebating depth: ||unlimited |
|Head width: ||3 15/64" (82 mm) |
|Noise level at idle: ||79 dB(A) |
|Weight: ||8.6 lbs. (3.9 kg) |