Tools for Working Wood
Friday Nov. 24 Showroom hours: 11AM-5PM

 Joel's Blog

Joel's Blog Ten Ways I am Doing Things Differently - Part 4   

11/08/2017


I've been working with wood since I was a kid. I took my first woodworking class at the 92nd Street Y when I was 6 years old. I've been taking classes and building stuff for over 35 years. For the last 17 I have been working at Tools for Working Wood. In that time, new tools and new techniques have come on the market. By and large I have ignored them in my personal work. However, I haven't ignored everything, and my methods of work have in certain areas changed dramatically for the better. I've broken up my list of ten things into three posts so I don't drone on and on to long. This is Part 3. Part 1 is here. Part 2 is here. Part 3 is here

The Moxon Vise


As I have gotten older it's been harder and harder for me to see anything. And bending over isn't much fun either. This isn't a joke. Sawing joints has always been problematic for me and I currently wear magnifying glasses for any close work. My bench (Frank Klausz style made over 30 years ago) is the right height for just about everything except cutting dovetails. It's just too low. So I hunch over thinking "there must be a better way." About ten or so years ago I found out about Jeff Miller's Bench on Bench. I built one and it was a big step in the right direction. Basically a Bench on Bench was a little table you put on top of your main bench and it has a double vise in the front.

Then along came the "Moxon Vise" popularized by Christopher Schwarz. The vise gets its name from Joseph Moxon's "Mechanick Exercises" But as I wrote last week the actual connection between the wood press illustrated in Moxon's book and how the Moxon vise is used to today is at best tenuous.

Many vendors now sell complete vises or just hardware kits. We used to offer the entire vise but currently we are only offering hardware kits which we are very pleased with. Our kit came about initially from a joint project with the Philadelphia Furniture Workshop. They came up with the ears on the sides, a cambered jaw, and the little shelf for clamping tails during layout. We added acme screws, washers, big nuts that don't wear out their mortises and spin, and handles that can be moved out of the way. You can read all about how to design your own Moxon Vise here.

The big reason the Moxon Vise made my list of ten is that I feel that by raising the overall height of where I saw I can see better, bend over less, and the whole process feels so much less jury-rigged. I am sawing better and more accurately - partially at least because I can see what I am doing , but also with the work clamped pretty low in the vise I can still easily saw uphill and have the work solid and vibration free. Not to mention my posture is better and it's less tiring.

The picture above is me in the middle of sawing out tails using one of the showroom / class benches where we have fitted Moxon vises at each end.

So that's my list of ten ways my work has changed. I hope to be able to say in a few years that my skills have gotten better, that I am still learning, and maybe have an even better list.

Has your woodworking changed over the years too? I welcome your comments.

Tags:Unclassified
Comments: 9
11/08/2017John Eugster 
I'm with you 100% on how we need to change our ways as the years go on. I'm pushing 70 and like you, the vision and bending over the bench got to be a bit much. Bending over was fine --- straightening up, now that's a different story. Made the Jeff Miller bench and find that on my woodworking bench it's just right for dovetails and on a slightly lower carving bench it's just right for carving. A big plus happened when I started to use a rechargeable head lamp from REI when cutting dovetail joints. Only down side is now I can't use the excuse of not being able to see!
11/08/2017Dave Heller http://hellerandhellerfurniture.com/
The Noden Adjustabench lets you raise the bench to cut dovetails - or do router inlay work - then lower it way below normal for heavy planing or power sanding. It is fast, reliable and generally fabulous. I built my own top, because I like a split bench, and added a tail vise on one side and a machinists vice on the other, and it can tackle any project. Moxon would have loved it.
I am amazed how little press this device gets, because any woodworker that sees me using it wants one.
11/08/2017Harvey 
I’m 100% with you on the Moxon vise. It’s better for doing all sorts of detailed work.
11/08/2017Jim Uber 
Well, I'm 72 and faced the same issues but I solved them by using a low stool.
An old bathtub stool is just the right height. :-)
11/08/2017Eric Rusch 
Sight has been my baine the last few years.
I recently got some nice "shop only" glasses that have helped.
Arthritis is another challenge, but larger foam padded handles on my clamps and matts to stand on all help the joints.
One of the best things is your posts Joel...honest.
I really align myself to your way of thinking and working in my shop.
I appreciate all the ways you help your readers sort through different challenges.
I also love your tools.
I spebd too much money on your products according to my wife. But she hasn't thrown me out yet, so I guess I'm lucky..haha
Thanks Joel and keep up the good work.
11/08/2017Kent Ryan 
In the newest Fine WoodWorking Magazine issue 265 - the Tools and Shops issue beginning on page 68 there is a really fine article by Christian Becksvoort titled "Working at the Right Height." Plenty of good ideas and approaches to getting your woodwork at a good working height your you. All ideas and approaches are the kind that should appeal to any wood worker who is willing to apply some skill and ingenuity to soothing the issues contributing to tired backs, sore legs, and the infirmities of us older wood workers. For me, Good light/lighting, comfortable working heights, and a comfortable stool are all musts for my workshop. Christian Becksvoort has given me an additional idea or two for further improvements.
11/09/2017Ariel P Jacala 
Joel

I am with you on the Moxon vise. I built mine based on a design published in TFWW with some influence from the Benchrafted design. Here is the URL http://www.jacalawoodworks.com/?page_id=230.

I just can't bend over like I used to - and this is my go to device when doing any dovetail work.

Great blog post Joel.
11/09/2017Jim Uber 
Well, I'm 72 and faced the same issues but I solved them by using a low stool.
An old bathtub stool is just the right height. :-)
11/09/2017Danny Hellyar 
Here , Here another shout out for the Noden adjustable height work bench . I’ve had one for a good No. of years now and I love it’s ease of adjustability and heavy construction .I was fortunate enough to find a slightly used one locally and saved a few hundred dollars .
Name:
Email (will not be published):
Website (optional):
Please enter your comment (HTML is not allowed):
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
Subscribe
 Joel's Blog
 Video Roundup
 Classes & Events
 Built-It Blog
 Work Magazine
Recent Blogs:
Woodwork at City Hall - 11/22/2017
The Marquetry Plane Shows Up In England 1760-1780 - 11/15/2017
Joel's Blog Ten Ways I am Doing Things Differently - Part 4 - 11/08/2017
Where Moxon Got His Mojo - 11/01/2017
Industry City Wants a Handout as it Kills Woodworking Jobs - 10/25/2017
An Introduction to Hand Tools - The Instructor Confesses - 10/11/2017
Ten Ways I am Doing Things Differently - Part 3 - 09/27/2017
Ten Ways I am Doing Things Differently - Part 2 - 09/20/2017
Ten Ways I am Doing Things Differently - Part 1 - 09/13/2017
Dovetailing Classes: a New Approach - 08/23/2017
MoMA's Lost History of Woodworking and Craft Classes - 08/09/2017
The Hardware Store Saw - The Long and Short of It - 08/02/2017
Dovetailing - Removing Waste - 07/26/2017
10th Anniversary Post!!!! - 07/19/2017
A Mid-Century Modern Bookcase - 07/12/2017
Teaching Dovetailing Skill - 06/21/2017
Father's Day - The Gift of Learning - 06/14/2017
Woodworking with Kids (Special Father's Day Edition) & Other Ways to Celebrate Father's Day & Posters - 06/07/2017
St. Monday and the Sharing Economy - 05/31/2017
Plane Spotting for the Deeply Curious - 05/24/2017
Older Entries...