Whiteside's router bit accesories, help you get the most out of your router and cutters.
The Whiteside Corner Chisel squares the corners of shallow mortises. The aluminum and steel chassis registers easily, and a deft hammer blow chops out the waste. ⅜” depth of cut.
The Solid Brass Inlay Kit cuts both the negative recess and positive inlay, from your 1/4" thick template. Includes a ⅛” solid carbide spiral router bit (part# RD1600) template guide ring and collar, a centering pin to insure exact alignment with the spindle, and instructions.
Brass Gauge blocks can be used to set the depth of cut on router tables and table saws, quickly check the distance from a cutter to a fence, verify a rabbet, or even quantify the young'uns rate of growth as charted on a door frame. 5 piece set consists of ⅛”, 3/16”, ¼”, ⅜”, ½” blocks, 2 ½ long.
A Steel 1/4" to 1/2" Adapter Sleeve adapts your 1/4" bits for use with a 1/2" router collet. Use it once, and it has already paid for itself.
Coco Chanel's famous advice: “Before you leave the house, remove one accessory” Sounds like heresy to us with all these handy tools from Whiteside, but we'll let it slide - only because we bet ol’Coco never owned a router.
Whiteside router bits, bearings and accessories are Made in the USA.
For over 30 years Whiteside Machine Company has manufactured best quality router-bits and we are proud to offer an exceptionally wide selection of their catalog. Combine them with your Festool router, or router table and you have a professional quality solution not only for shaping, but for joinery, grooving, copying templates, and even making the kid a custom set of wooden train tracks. All Whiteside router bits are made in the USA, but their' commitment to domestic production goes beyond just bits. Whiteside uses American made grinding wheels in their machine shop, and packages their bits in American made plastic sleeves and cases.
Flag waving aside, the real reason to purchase a Whiteside router-bit is because the hands down top quality of their product. Their router bits feature innovations such as concave ground cutting edges, who's sole purpose is to improve product quality, not simplify a production process, or shave a few cents per bit in manufacturing cost. Whiteside is a company who would rather build their own proprietary machinery, than settle for what's available, and with over 200 years of collective experience in their grinding room alone, they have the chops to pull it off. What that means for your woodworking is not having to worry about endlessly sanding out machine marks. It means not having to worry that a pre-maturely dull bit will tear out the grain. It means you can push your bit through the wood with the confidence of knowing that the folks who made your router bit cared as much about their product, as you care about yours.
Whiteside Machine is a family owned and operated business, their router-bits are made in Claremont, North Carolina USA.
Fine Wood Working had this to say about Whiteside in their May June 2007 Router-bit review: "At the end of the day, the Whiteside and the Eagle bits had risen to the top of the mix, tying for the highest score. Lee Valley had the second-highest score, followed by Southeast and Woodtek in a tie for third. By the way, Whiteside also had the best bit when we reviewed straight bits in our August 1999 issue (FWW #137). We named the Eagle and Whiteside bits best overall. And, since the Whiteside had one of the lowest prices of the top bits, we also named it best value."