Tools for Working Wood
Jerry-Rig Universal Vise No reviews yet - add a review
Found in Departments: Carving Accessories
  Workholding
The vise with bolt and hex key
The vise with bolt and hex key
The accessory hardware kit
Accessory table clamp
Small position plates for smaller carvings
Large position plate for larger carvings in the round

Quantity in Cart: none
Code: MS-JR.XX
 Vise only (includes bolt and clamp for attaching to your workbench, and a hex wrench) ($299.95) In Stock
 Accessory clamp for clamping the Jerry-Rig to the front edge of your worktable ($95.95) In Stock
 Accessory kit of mounting hardware to attach your work to the clamp ($23.95) In Stock
 Small position plates for smaller carvings. Kit includes one stem, two plates (5/16" x 1-12" and 3/4" x 2-1/4") 2 screws and a wrench. ($51.95) In Stock
 Large position plate for larger carvings in the round. Kit includes one holder - 5/8" x 3-5/8" and two screws. ($42.95) In Stock
Quantity:
When you are carving, especially carving in the round, it's important to be cause to work on all sides of your carving. You can work on a tiny bench that you can move around, or you can have a completely flexible holder that puts the work exactly where you want it. The Jerry-Rig is a rock solid fully 360° rotatable carving platform that can be easily and rigidly locked in any position that's comfortable for the operator. The Jerry-Rig is built like a tank and objects will remain locked in position even during severe shocks incurred while using power tools. The 2 1/2" diameter clamping ball hold a carving table that at its height is about 9 1/4" above your worktable. The vise can be bolted to the workbench though a hole with a bolt and clamp (provided). For those unable to have a hole in their worktable an accessory clamp is available which clamps to the front of any table up to 3 1/4" thick. Some people have mounted their vise on the front of their workbench so that they can work sitting down. Your carving is attached to the plate and rod that sticks out from the ball. These plates and rods are easily interchangble so that you can switch to a smaller base when you need to get underneath a carving, or you just want to work on several carvings at once. To remove the rod, just unscrew a single cap screw with an allen key (supplied). Additonal bases are available as an accessory. To attached you work to a plate you can use standard wood screws or get our accessory hardware kit which also includes two miniature carving screws for use with the Jerry Rig.  

Please contribute your own review:

 
Anonymous reviews will not be published
To calculate shipping charges or edit the items in your shopping
cart click on Cart (above) or click here
To finish the ordering process click Checkout (above right) or click here.
To contact customer service click Customer Service (above) or click here.