|When you carve or saw out any design that isn't a straight line you need a pattern. These days we typically draw the pattern on some paper and the trick is transferring the pattern to the wood. Here are all the methods I know about or used over the years.|
1) Draw the pattern in reverse, go over it in soft pencil, put the pattern pencil side down on the wood and rub the paper. The pencil pattern will transfer to the paper.
2) Lay the pattern on the wood over a sheet of carbon paper. Trace over the pattern, the carbon paper will transfer the pattern to the wood.
3) Lay the pattern on the wood and go over it with a pricker of some sort. You can use a single pointed awl, a revolving multi-pointed pricker, or even a ball point pen. The latter puts a readable dent in the wood and works pretty well. Just make sure you put a mark at all the important junctions in the design. I have had good luck with the ball-point method. With the rotating pricker, which I bought specifically for this purpose, the points were too small to see, and I had trouble steering the wheel.
4) Attach the pattern to the wood with a low tack spray adhesive. This is my current favorite method and when I first tried it I used what I had, which as Super 77 which worked great except that at the end of carving I could not remove the bits of the pattern that were not carved away. Most annoying!! Chris Pye showed me the error of my ways and I switched to a low tack spray mount which works perfectly. There are two things that are really important to do if you use spray mount. The first is that you have to make sure that the pattern is bonded all over the work. Otherwise when you carve, if you hit a dry spot, the pattern will probably tear and you will lose the design. If the paper is solidly bonded you just carve through it with no worries - as long as your tools are properly sharp. If your tools aren't sharp what happens is that you rip the paper as you carve and ruin the pattern. But to be fair if your tools aren't sharp enough to cleanly carve through a paper pattern, they also aren't sharp enough to cleanly cut wood in many situations. So a torn pattern is a good wake-up call.
5) Another method which I have never tried, is to print out the pattern in reverse on a copier or laser printer, and lay it pattern side down on the wood. Then pour some acetone (wear gloves and other safety stuff) over the paper which will release the ink from the paper and transfer to the wood.
In Other News:
Peter Korn, Author and Executive Director of the Center for Furniture Craftsmanship in Maine will be in New York City at the Museum of Arts and Design in New York on Monday, January 13 to discuss his new book, "Why We Make Things and Why It Matters"
In Conversation: Peter Korn and Glenn Adamson
Monday, January 13, 2014
Museum of Arts and Design
6:30-7:30pm in the Theater at MAD
7:30-8:00pm Book signing with Peter Korn
Join Glenn Adamson, MAD's Director and author and furniture maker, Peter Korn for a discussion on the nature and rewards of creative work, and how the practice of contemporary craft is transformational to the individual and society.
Space is limited and is on a first-come, first-served basis. -- THE EVENT IS FULL---
RSVP necessary by January 10 at 212.299.7758 or firstname.lastname@example.org.
|Comments are closed.|