Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

JOEL Joel's Blog

Some Tips On Using Braces Pt 1: Ratcheting for more leverage

08/05/2010

Some Tips On Using Braces Pt 1: Ratcheting for more leverage 4In the picture I am boring a pretty big hole. Pulling the handle of the brace towards or against me is pretty easy, but rotating the handle from left to right when the handle is far way from me is a different story. With my arm outstretched, moving from left to right, I have no leverage, and very little strength. On a small hole this isn't a big deal, but I struggle with larger diameters. The solution, with a common American ratcheting brace, is to use the ratchet. Instead of trying to move the handle in complete circles and have no power for the left to right parts of the stroke, I just ratchet the brace forward and back, on the part of the stroke where I have the most arm strength. Drilling a big wide hole becomes pretty darn easy and quick. I think this is one reason why American style ratcheting braces became, in the late 19th century, so popular worldwide and drove the English ultimatum brace out of production before World War One.

In the picture the green lines show the back and forth part of the powerful part of the stroke where I am ratcheting away, and the red line shows where you have very, very little arm strength by comparison. Click here for our selection of jennings bits.

Click here for part two.

Join the conversation
08/05/2010 Tico Vogt http://www.ticovogt.com
Nice tip. Thanks!
08/09/2010 LizPF
I love my ratcheting brace! As a short, weak, middle-aged woman, I find the
increased torque helps me with everything, from drilling to screwdriving. This
was the first "galoot" tool I used, and I will not part with it.

At the moment, it has a screw gun check and a Phillips bit in it, for tightening
the connector hardware on a kitchen full of Ikea cabinets.

I've been using the ratchet for quite a while, usually just pulling towards me.
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.