Tools for Working Wood

 Joel's Blog at Tools for Working Wood

Hand/Eye vs. Machine  


In the early 19th century everything was done by hand. From the engraver carving a family crest on a pocket watch to the seven year old assembling fusee chains for tuppence a day (or thereabouts). Woodworking, metalwork, it was all the same. Hand work, under various working conditions and repetition. Practice by the way really makes perfect and you can go faster.

Then along came machines and hand work was replaced by machine work. Where in the old days a machinist would have to hand scrape a valve facing to ensure accuracy in joining, now a surface grinder does that in a trice, with just a machine operator to run the machine. The skill isn't in the "doing" anymore, it's in the "figuring out how to do". This frees the "figuring out how to do it" guy to make stuff to very high repeatability and accuracy at the expense of some expensive tooling. And it means that the "doing it" person needs to have a lot of practice before they can do repeatable work, but they don't need to have all that expensive equipment.

And right now it occurred to me between the blogs of Konrad Sauer and Karl Holtey you can see both philosophies at work. Both guys do really, really wonderful work. Karl can set up his machines to produce planes that are so exact in dimension that he can pin them together. Konrad on the other hand can do all sorts of custom designs and tweaks because there is no tooling and setup time to worry about.

Karl needs a shop full of expensive equipment, Konrad needs time and practice. Karl can run a batch of identical planes extremely efficiently to an incredible level of repeatability. But customization means new expensive tooling.

Each plane in Konrad's shop is slightly and unintentionally different, and he has to custom fit each part to every plane, but special orders are easy to deal with efficiently.

Which approach is better? Well I think both guys do great work and both of them found a work method that works for them. So that's not the issue.

Why is all this important? because modern amateur woodworking has very distinct slant in the machine approach. Your average woodworker who wants to do something just buys a machine and it's done. There isn't much call for basic skills. The goal is to produce something. Folks like me are more interested in learning the hand skills, just like people want to learn how to play the guitar.
Both approaches are perfectly valid. I can list the advantages to both but it would take hours. The trick I think is not getting buttonholed. And every once in awhile someone reminds me that finishing projects is also important and good power tools can help you do that, and compensate for lack of professional speed and 18th century hand skills.

So if you use machines a lot - try taking the time to learn classic hand skills - you might find it relaxing and more productive than limiting yourself to what your machines can do. Relish the freedom not having to do only what the machine lets you do. Work to fit, making pieces as you go.
If you use hand tools for everything, remember that certain tasks a machine can do faster and better, and there is no reason to get discouraged if you find that certain hand operations are beyond your current level of skill to do efficiently but can easily be done by machine.

It all comes out the same. In the picture above one piece of wood was cut by hand and shot on a shooting board (using a dullish Bedrock 604), the other was cut using a Festool Kapex chopsaw. I needed a bunch of pieces for another blog entry I am working on, time is short, and I was glad I had the machines available.

Tags:Woodworking Tools and Techniques
Comments: 2
Excellent continuation of something that draws me ever more into hand tools, I made a similar comment over on Schwarz's blog the other day, perhaps it was inspiration for this? As you mention, both end up with same result, but different investments made. I'm finding since I'm not usually making more than 1-5 of something, hand tools + skills are the better investment. Cost per use calculations usually point to the sweet hand tools. You can buy one heck of a hand tool setup for dovetails for for what a dovetail jig + router cost, plus its quieter, more versatile, and for me more enjoyable. Now if I was cranking out 15 drawer chests every day that investment mix might change. Thanks for the excellent write-up.
07/31/2009Rob Porcaro
Very thoughtful and interesting, as usual, Joel.

This is reminiscent of David Pye's workmanship of certainty and workmanship of risk concepts. I agree with you, I would not want to restrict my methods to either machines only or hand tools only.

For example, the Festool must surely be able to quickly produce lots of those nice cutoffs, and that's good. But to remove .002" from one of them if needed to acheive a perfect fit, shooting is the answer.

Rob Porcaro
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
 Joel's Blog
 Ben's Blog
 Work Magazine
Recent Blogs:
Repair Tip-11/25/2015
A Visit to the Long Island Museum of American Art, History, and Carriages-11/11/2015
Begin at the Beginning-10/28/2015
Here Lies Duncan Phyfe-10/21/2015
July Fourth Weekend and Objects That Connect. -10/07/2015
On the Diversity of Saws-09/30/2015
Woodcarving At Coney Island-09/09/2015
The Philadephia Museum of Art and Festool Fall News-09/02/2015
New Saturday Hours-08/19/2015
A Look at Violin-Maker's Planes-07/08/2015
Linoleum Block Printing-06/17/2015
Blasts from the Past - Reimagined - and Made For the Future-05/15/2015
Festool Package News and Some Long-Term Things You Should Be Aware Of-04/29/2015
Sleep Like an Egyptian-04/08/2015
Game Changer: Should You Buy the Festool Conturo Edge-Bander?-03/11/2015
Guest Blog: Many Sincere Thanks-02/25/2015
Festool Vacuums and the Changing Jobsite-02/18/2015
News (some good some sad)-02/04/2015
Pay For Play-01/21/2015
Diamond Sharpening - Part 2 - Grits and Scratches-01/14/2015
Older Entries...
Some Interesting Woodworking Blogs
Adam Cherubini
Tom Fidgen
Full Chisel Blog
Hock Tools - The Sharpening Blog
Norse Woodsmith
Jeff Peachy (book conservation)
Pegs and 'Tails
The Produce Savant
Konrad Sauer
Another Chris Schwarz Blog
Robin Wood Woodcraft
Rude Mechanicals Press(Megan Fitzpatrick) - Hand Tool News
The Woodshop Bug
Chris Schwarz
Some Woodworking Forums
Family Woodworking
Saw Mill Creek
Wood Central
Woodwork Forums (Australia)
UK Workshop